2019 Pricing Adjustments

We’ve managed to hold prices stead for almost 5 years.  Last year (2018), prices increased by our suppliers, but we held to our promise of no price increase in 2018.  We’ve been willing to take that loss in 2018, but we are now forced to adjust prices upwards.  As for January 1, 2019 – MSRP will increase by 3.25% (rounded up to the nearest $X.X4 or $X.X9) across the board.  Dealers will see in increase of 7.5% across the board.  Distributors will receive a one-on-one notification on their price increase.

Here’s how the prices line up —

1 ounce Thin/Medium/Thick (M5T, M300M, M1100G)

  • MSRP — $5.99
  • Dealer Cost — $2.60

2 ounce Thin/Medium/Thick (M5T, M300M, M1100G)

  • MSRP — $9.84
  • Dealer Cost — $4.02

8 ounce Thin/Medium/Thick (M5T, M300M, M1100G)

  • MSRP — $28.45
  • Dealer Cost — $15.71

2 ounce FLEX (M20FT and M300FM)

  • MSRP — $11.89
  • Dealer Cost — $5.48

8 ounce FLEX (M20FT and M300FM)

  • MSRP — $46.50
  • Dealer Cost — $221.50

1 ounce FOAM Safe (M100F and M1000F)

  • MSRP — $13.44
  • Dealer Cost — $7.59

1 ounce High-Performance (M100XF)

  • MSRP — $10.99
  • Dealer Cost — $5.59

2 ounce Accelerator / Debonder (MH16 and M68DB)

  • MSRP $5.24
  • Dealer Cost — $3.61

8 ounce Accelerator (MH16)

  • MSRP — $13.44
  • Dealer Cost — $9.02

12 ounce Aerosol Accelerator (MH16A)

  • MSRP — $20.74
  • Dealer Cost — $11.47

Epoxy (5, 15, and 30 minute) —

  • MSRP — $13.99
  • Dealer Cost — $8.86

Extension Tips

  • MSRP — $4.24
  • Dealer Cost — $ 2.90

Thread Locker (Brush in Cap)

  • MSRP — $7.24
  • Dealer Cost — $3.73

We *REALLY* didn’t want to raise prices, but we had to.  We’ve been experiencing price increases from our vendors for the past nine(9) months, but we held firm to our promise of new price increases in 2018.  We hope you understand.

Contact Us

We want to hear from you. Write, call or email us with your comments and questions or tell us about a project you are working on using Mercury Adhesives for consideration to be featured on our site.